Scale Remover (Electrolytic basis) Introduction
March 22, 2022 at 11:11 AM
—
admin
Tiaano ventured and developed a Electrolytic Scale Remover (ElSr). It removes the scale by electrolytic operation without adding chemicals (Zero Chemical). It generates Oxidants in the water; Oxidants mitigate the Corrosion, Bio-fouling, Micro-Organism growth, Scaling, & spread of airborne bacteria.
Passing DC current from positive element to the negative element, it creates high pH in the vicinity of the negative. High pH causes the scale to be deposited in the reactor. The water is not soft at the outlet of the ElSr, but the scale-forming ions have been reduced to a level that prevents the precipitation in Water distribution system. ElSr will precipitate all scale-forming ions, not just magnesium and calcium but other ions that are susceptible to dropping out the liquid at high pH Viz., Silica, Fe, Manganese etc.
Scale / Slime fouling on Condenser results reduction in heat transfer and increase electrical Energy. Hence, with Ionization in ElSr, scale precipitation occurs and it never adheres to the Condensers/cooling tower Water distribution system – it leads no further scale build up, slowly the existing scales also peels out in due course. Resulting maintain ‘DELTA T’ as it is when you used descaling agent or improves. Thus Electricity is saved.
Further the complete technical details shall be viewed in our websitehttp://www.scaleseparator.com| for Video visit the link https://www.youtube.com/watch?v=ko4tHEEjhC4 | and for PPT visit the linkhttps://drive.google.com/file/d/0B4Oe_aIQ9EvObHlTRmxPTXBWRms/view?usp=sharing
